Heaters and Ventilation Fans

Showing 1 to 20 of 20 products
Product Image

NEW Broan LP80 White 80 CFM 1.1 Sones LoProfile Bath Ventilation Exhaust Fan

LP80
The LoProfile™ fan is narrow enough to be installed in a wall between 2x4 studs. Ceiling or Wall
  • 80 CFM 
  • 1.1 Sones for quiet operation ( sones measure sound level 0 being silent, 6 being loud)
  • ENERGY STAR 
  • Fits in 2 x 4 construction for installation flexibility
  • NEW, OLD STOCK

$49.99

Product Image

NEW Broan NuTone 97010648 Range Master Blower and Rough In Housing


  • Description: Range Master Blower that is Permanetly Lubricated and Rough In Housing. For use with Model 97010648 and 97015477
  • Item #/MPN: 97010648
  • Color: Black
  • Condition: NEW OLD STOCK
  • Voltage: 120V
  • Amperage: 3.3 Amp
  • Country of Manufacture: Mexico
  • Brand/Manufacture: Broan- NuTone

$329.99

Product Image

NEW Broan NuTone DF6 White Round 6" Ceiling Wall Diffuser


  • Title: NIB Broan NuTone DF6 White Round 6" Ceiling Wall Diffuser
  • Description: 
  • Room Inlet for use with Single Port in-line ventilation fan (not included)
  • Install in ceiling or wall
  • Technical Data: For use with fan model SP100, SP140, SP200 
  • Item #/MPN: DF6
  • Condition: New in package
  • UPC: 026715057771
  • Brand/Manufacture: Broan NuTone

$27.99

Product Image

NEW EASYHEAT SKDG H & G Mat Splice Kit to Repair Snow Melting Mats

  • used to repair dual and single conductor construction EasyHeat Snow Melting mats and cable kits, thermal storage and radiant heating mats damaged either during installation or subsequent operation
  • Item #/MPN: SKDG
  • Condition: New In Package
  • UPC: 013627070417
  • Brand/Manufacture: EASYHEAT

$29.99

Product Image

NEW Engineered Products HST84 Thick Wall Heat Shrink Tubing w/ Sealant Bag of 6

  • Title: NEW Engineered Products HST84 Thick Wall Heat Shrink Tubing w/ Sealant Bag of 6
  • Description: Tubing Type:Heat Shrink Tubing
    Voltage:1 kV
    Wall Type:Heavy Wall
    Material:Polyolefin, Adhesive Lined
    Shrink Ratio:3-1
    I.D. Expanded:0.70 in (17.8 mm)
    I.D. Recovered:0.25 in (6.4 mm)
    Wire Max:2 AWG
    Wire Min:8 AWG
    Color:Black
    Length:8.00 in
    Additional Information:Package: 6x8.00 in
    Manufacturer Series:HST
  • Item #/MPN: HST84
  • Condition: NEW
  • UPC: 780321101715
  • Brand/Manufacture: Engineered Products Co.

$29.99

Product Image

NEW Fantech BFRK 100 Bath Fan Conversion Kit


  • Description: Kit includes everything you need to convert your noisy exhaust fan into a quiet, efficient fan you can live with. Includes complete instructions, 110 CFM Energy Star Rated Inline Fan, duct reducers, insulated flex duct, wire and accessories. Use with existing fan housing and grille. (Attic access necessary.)
  • Manufacturer/Brand: Fantech
  • Item #/MPN: BFRK 100 
  • Type: Bath Fan Conversion Kit
  • Dimensions: 4" Duct
  • Country of Manufacture: Germany
  • Condition: New Old Stock

$166.99

Product Image

NEW Fantech FQ110 FQ Series 110 CFM Quiet Ceiling- Mount Exhaust Fan

Quantity Discount Available Use Best Offer
  • Description: Thermal overload protection. Low profile grille fastened with torsion springs
    Integrated metal backdraft damper. Includes 5 hanger bars for easy positioning between 16" to 24" on-center studs
    Galvanized steel housing with rust-proof paint. Energy efficient, permanently lubricated PSC ball bearing motor
  • Item #/MPN: FQ110
  • Color: White
  • Condition: New Old Stock
  • UL Listed: UL Listed for use over a tub/shower with a GFCI branch circuit wiring
  • Size/Dimensions: Duct Connection 4 Inches - 
     Height 8 1/2 Inches Width 11 7/8 Inches Length 11 Inches
  • UPC: 650737837389
  • Country of Manufacture: China
  • Brand/Manufacture: Fantech

$99.99

Product Image

NEW Fantech FQ80FL FQ Series Quiet Ceiling Mounted Exhaust Fans w/ Light

Quantity Discount Available Use Best Offer
  • Description: Fantech FQ Series Quiet Ceiling Mounted Fans with Lights provide remarkably quiet, energy efficient ventilation for baths, powder rooms, and other areas. The 80CFM is incredibly quiet with 0.4 sones sound rating. Fantech FQ Series exhaust fans are designed for intermittent or continuous operation to meet ASHRAE Standard 62.2 and all models are ENERGY STAR qualified. In addition, the FL series, includes the ultra quiet exhaust fan with light. This light has a convenient night light setting, contemporary design that's low profile, and a white polymeric grille with frosted light lens. Included is a 26 watt CFL bulb and a 4 watt night light so that the fan, light and night light can be wired to operate separately.
  • Item #/MPN: FQ80FL
  • Color: White
  • Condition: New Old Stock
  • UL Listed: UL Listed for use over a tub/shower with a GFCI branch circuit wiring
  • Size/Dimensions: 11.8" x 11.8" / Duct Connection 4 Inches - 
  • UPC: 650737837396
  • Country of Manufacture: China
  • Brand/Manufacture: Fantech

$119.99

Product Image

NEW NuTone XN80L ULTRA GREEN Series White 80 CFM Single-Speed Ventilation Fan

NuTone XN80L ULTRA GREEN Series White 80 CFM Single-Speed Ventilation Fan with Light & Nightlight
 NuTone ULTRA GREEN Series Fans deliver everything you wished for in a bath fan – premium ventilation to help reduce airborne pollutants, extremely quiet operation, energy efficiency, consistent power and most impressively, the fastest, easiest, most universal installation available. These fans are ideal for both spot ventilation in humid bathrooms, as well as continuous ventilation to meet various building codes and Green Building standards around the United States.
  • 80 CFM reduces humidity to quickly eliminate fogged mirrors and manage moisture in bathrooms up to 75 square feet, so your vision will always be clear and your surroundings will always be comfortable
    ULTRASilent™ with QStream™ Sound Technology results in operation at less than 0.3 Sones – the quietest sound rating attainable -- for an environment that is so quiet, you’ll likely forget the fan is on
    ULTRALucent™ Lighting Technology provides 36 watt lights (two 18-watt bulbs included) delivering the brightness (measured in lumens) of models previously requiring 60 watts of CFL output – You get the best of both worlds; clear, even lighting with no hot spots and smaller energy bills
    ULTRAQuick™ Installation Technology uses an exclusive telescoping mounting frame with pre-installed screws, snap-in housing, snap-in blower and an inside-out mounting duct connector that deliver the fastest, easiest, most universal installation
    Retrofit installations can be done entirely from the room-side – no attic access required. This means a faster, easier installation so you can move on to something else
    Unique telescoping mounting frame can be placed and fastened through drywall hole because it expands from 14” to 24” and fits any type of joist, I-Joist or truss construction for a “no guesswork” installation to make the work fast and easy
    Snap-in housing and blower further simplify installation since you can hear – and feel – when they are properly seated. Easy-to-position carriage allows housing location adjustment between joists so you can control the correct ceiling placement
    ULTRASmart™ DC Motor & Control Technology provides energy efficiency almost 10 times greater than ENERGY STAR® requirements and maintains rated power (CFM) in nearly every installation. You have confidence you’re getting the expected performance and won’t even notice the fan usage on your utility bill
    UL Listed for use over tubs and showers with a GFCI circuit; so you can capture the steam before it spreads throughout the room by locating your fan exactly where you need it the most
    Compatible with Radiation Damper RDFU which helps prevent flame and heat from spreading to other areas in multi-level buildings. In some cases an accessory wire jumper kit is required. This kit (model RDJUMPU) provides the additional lighting and sensing wire length necessary to bypass the damper
    Can be used to comply with ASHRAE 62.2 and CALGreen

$89.99

Product Image

NEW QMark/Marley CWH-SM1 Sufrace Mounting Frame For CWH 1000 Series Wall Heater


  • Title: NEW QMark/Marley CWH-SM1 Surface Mounting Frame for CWH 1000 Series Wall Heater
  • Description: Surface Mounting Frame Accessory
  • Item #/MPN: CWH-SM1
  • UPC: 685360078249
  • Brand/Manufacture: QMark/Marley

$29.99

Product Image

NEW Raychem H915 Downspout WinterGard Hanger Bracket for Heating Cable

H915
Hanger Bracket Kit provides mechanical protection and strain relief for
WinterGard Wet or Gardian heating cables when entering downspouts and
over sharp edges. The H915 is approved for use with UL Listed and CSA
Certified WinterGard Wet heating cable systems


$14.99

Product Image

NIB Berko Marley RQ-91-277 Infrared Heater

NIB Berko Infrared Heater
 RQ-91-277
 
RQ Series Infrared Heaters
Model: RQ-91-277
Dimensions (H.L.W): 3-5/8 x 25 1/2 x 5-34
Reflector: 90 Degrees
Number of Lamps: 1
Watts: 1600
Volts:  277V
 
MSRP $175.00

$150.00

Product Image

NIB Cadet 69104 CTS4A Surface Mount Adapter for Com-Pak Plus Twin Wall Heater


  • Title: NIB Cadet 69104 CTS4A Surface Mount Adapter for Com-Pak Plus Twin Heater
  • Description: Cadet Com-Pak Twin Plus Adapter in smooth white color is made of steel for enhanced durability. It features powder coat paint finish for corrosion resistance and can be surface mountable.  It can be used with cadet's com-pak twin series wall heater 
  • FOR USE WITH ANY CT CADET MODEL HEATER
  • 1/2" Knockouts ( One Knockout is already knocked out )
  • Item #/MPN:  CTS4A
  • Condition: Never used but one knockout is already knocked out, see photo
  • Color: White
  • Size/Dimensions: 16-1/2" x 12-1/4" x 4-3/8"
  • Brand/Manufacture: Cadet

$49.99

Product Image

NIB Marley AD1114 4" Ceiling Mount Diffuser For Round Duct Central Ventilation

  • Manufacturer/Brand: Marley Engineered Products
  • Item #/MPN: AD1114
  • Type: 4" Ceiling Diffuser, Ideal for central ventilation, cooling, and heating
  • UPC: 03989900664
  • Condition: New in Package, Old Stock

$19.99

Product Image

NIB Marley IFD4 In-Line Backdraft Damper 4" Duct

  • Title: NIB Marley IFD4 In-Line Backdraft Damper 4" Duct
  • Manufacturer/Brand: Marley Engineered Products
  • Item #/MPN: IFD4
  • Type: Damper
  • UPC: 685360148786
  • Condition: New in Box

$24.99

Product Image

New Broan 505 8" Vertical Discharge Utility Fan

  • Manufacturer/Brand: Broan
  • Item #/MPN: 505
  • Type: Utility Fan
  • Finish/Color: White
  • Grille Length 11-1/2"
  • Duct Diameter 8"
  • CFM 180
  • Rated Amps 1.5
  • Voltage 120
  • UPC: 026715022854
  • Condition: New Old Stock Box Shows Signs of Wear 

$49.99

Product Image

New Fantech FIDT4 4" Flexible Insulated Duct

QUANTITY DISCOUNT USE BEST AVAILABLE OFFER
  • Description: Flexible round insulated duct. The insulation provides greater thermal efficiency to save energy and goes up to 25-feet in length. 
  • Item #/MPN: FIDT4
  • Condition: New Old Stock
  • UPC:650737590406
  • Brand/Manufacture: Fantech

$21.99

Product Image

New Nutone VS-63 Brush Nickel Automatic 15 Minute Time Switch

  • Item #/MPN: VS-63
  • Color: Brush Nickel
  • Voltage: 125V
  • AMPS: 20
  • Condition: New Old Stock
  • Brand/Manufacture: Nutone

$19.99

Product Image

NuTone 838BL Black Wall Cap Vent Cover Damper Duct 3-1/4" x 10"

  • Description: NuTone 838BL Black Wall Cap Vent Cover Damper Duct 3-1/4" x 10"
  • Item #/MPN: 838BL
  • Color: Black
  • Condition: New
  • Size/Dimensions: 3-1/4" x 10"
  • UPC: 784891271830
  • Brand/Manufacture: NuTone

$19.99

Product Image

NuTone VG-59 Damper Assembly and Grille For Roof Fan

 

  • Description: For use with Roof Fan RF-40
  • Item #/MPN: VG-59 
  • Condition: New in Box, Old Stock
  • Brand/Manufacture: NuTone

$19.99